## Auto-summary 2026-03-06 10:00 KST

- What happened:
  - Diagnosed OpenClaw gateway health: confirmed service running via `openclaw gateway status` and `systemctl --user status openclaw-gateway`, with browser control and Telegram/Discord providers active.
  - Restarted `openclaw-gateway.service` via `openclaw gateway restart` to clean up leftover processes and clear earlier browser-control timeouts.
  - Audited the reverse SSH tunnel setup: inspected `reverse-ssh-tunnel.service` (systemd unit) and its logs, plus connection state on the VPS `lagoon-oracle-vps`.
  - Verified the tunnel’s target ports on the VPS using `ss -lntp` and `journalctl -u ssh`, confirming that 10022/18789 were not listening initially.
  - Restarted `reverse-ssh-tunnel.service` and confirmed that the VPS now listens on `127.0.0.1:18789` and `0.0.0.0:10022` as intended.
  - Inspected the systemd unit and script for the tunnel, then rewrote `/home/lagoon3/bin/reverse-ssh-tunnel.sh` to add hardening options for the SSH command and reloaded it via service restart.
- Decisions / stable facts:
  - `reverse-ssh-tunnel.service` remains the canonical service for exposing lagoon3’s SSH (port 22 → VPS 10022) and OpenClaw gateway (18789 → VPS 127.0.0.1:18789).
  - The main failure mode was SSH reporting "remote port forwarding failed" while the systemd service stayed in `active` state, leaving the tunnel logically broken even though the unit looked healthy.
  - To prevent this, the tunnel script now enforces:
    - `ExitOnForwardFailure=yes` so any port-forward failure kills the SSH process and lets systemd restart it.
    - `ServerAliveInterval=30` and `ServerAliveCountMax=3` to detect dead connections quickly.
    - `BatchMode=yes` and `ConnectTimeout=10` to avoid interactive prompts or hangs.
- Next actions / blockers:
  - Monitor `reverse-ssh-tunnel.service` over the next few days for recurring failures; if they happen, confirm via `journalctl -u reverse-ssh-tunnel.service` that ExitOnForwardFailure is causing clean restarts instead of half-broken tunnels.
  - Optionally, future-hardening step: migrate the unit to use `autossh` instead of raw `ssh` for even more resilient reconnect behavior.
- Links/IDs:
  - Gateway service: `openclaw-gateway.service` (user systemd), log: `/tmp/openclaw/openclaw-2026-03-05.log`.
  - Reverse tunnel unit: `/etc/systemd/system/reverse-ssh-tunnel.service`.
  - Reverse tunnel script: `/home/lagoon3/bin/reverse-ssh-tunnel.sh`.
  - VPS host alias: `lagoon-oracle-vps`.

## Auto-summary 2026-03-06 13:00 KST

- What happened:
  - No new main-session activity between 10:00 and 13:00 KST; no additional commands, file edits, or infrastructure changes beyond the earlier gateway and reverse SSH tunnel work already captured in the 10:00 summary.
- Decisions / stable facts:
  - Operational state remains as of the 10:00 KST recap; no new decisions or configuration changes were made in this interval.
- Next actions / blockers:
  - Continue to monitor `openclaw-gateway.service` and `reverse-ssh-tunnel.service` over time; no new follow-up items were added during this window.
- Links/IDs:
  - Unchanged from the 10:00 KST summary for 2026-03-06.

## Auto-summary 2026-03-06 16:00 KST

- What happened:
  - No additional main-session conversations, commands, or system changes occurred between 13:00 and 16:00 KST; environment and services remain as previously summarized.
- Decisions / stable facts:
  - Gateway and reverse SSH tunnel configurations (including the hardened `/home/lagoon3/bin/reverse-ssh-tunnel.sh`) remain the current, active setup with no new modifications.
- Next actions / blockers:
  - Keep passively monitoring `openclaw-gateway.service` and `reverse-ssh-tunnel.service`; no new action items emerged in this interval.
- Links/IDs:
  - Same as in the 10:00 and 13:00 KST summaries for 2026-03-06.

## Auto-summary 2026-03-06 20:00 KST

- What happened:
  - Ran the memory backup pipeline once on-demand via `scripts/backup_memory.sh`, producing commit `81b10ad` ("Auto-backup: 2026. 03. 06. (금) 18:24:29 KST"), which created `memory/2026-03-06.md` and pushed changes to the GitHub backup repo.
  - Investigated perceived slow assistant responses by checking `openclaw gateway status`, `systemctl --user status openclaw-gateway`, recent gateway logs, and system load; confirmed the host was not CPU-bound but saw Discord health-monitor restarts marked as `reason: stuck`.
  - Experimented with Discord channel management: inspected `openclaw channels --help` and `openclaw channels list/status`, attempted a CLI-based removal with an unsupported `--force` flag (which failed), then instead toggled Discord via config by editing `~/.openclaw/openclaw.json` to set `channels.discord.enabled=false`, restarting `openclaw-gateway.service`, and verifying the change with `openclaw channels status --probe` (Discord shown as disabled, Telegram running normally).
  - After troubleshooting, re-enabled Discord at the user’s request by setting `channels.discord.enabled=true` in the same config, restarting the gateway again, and confirming that the Discord bot logged back in while Telegram remained healthy.
  - Root-caused a ~40-minute "no response" window by inspecting `/tmp/openclaw/openclaw-2026-03-06.log`: found a long-running LLM request that hit a 10-minute timeout (`FailoverError: LLM request timed out`) around 19:04 KST, overlapping with Telegram `stale-socket` and Discord `stuck` health-monitor restarts, which together led to dropped or heavily delayed replies and no immediate acknowledgement of a `.` test message.
  - Communicated this diagnosis back to the user, including the fact that earlier attempts to manipulate channels and restart the gateway had partially succeeded but their results were not surfaced promptly in chat because the affected turns were still tied up in long-running tool/LLM flows.
- Decisions / stable facts:
  - The daily memory backup pipeline (script + GitHub repo) is confirmed working for ad-hoc runs; `scripts/backup_memory.sh` and the `openclaw-memory-backup` repo remain the canonical mechanism for snapshotting `memory/` files.
  - `channels.discord.enabled` in `~/.openclaw/openclaw.json` is now the preferred switch for temporarily disabling or re-enabling Discord when debugging performance or stuck-provider behavior, rather than deleting the channel configuration.
  - Slow or missing replies can be caused by a combination of long LLM timeouts plus channel health-monitor restarts, even when system load is low and the gateway service appears healthy.
  - The assistant should proactively send brief "in-progress" status messages before or during long-running tool/LLM operations to avoid silent gaps when similar issues occur again.
- Next actions / blockers:
  - Continue monitoring gateway logs for repeated `FailoverError` / LLM timeout events and recurring Discord `stuck` or Telegram `stale-socket` restarts; if patterns persist, consider adding a small diagnostic helper script to grep recent logs for LLM timeouts and channel restart reasons in one command.
  - At a later time, revisit the `channels.telegram.groupPolicy` and `channels.msteams.groupPolicy` doctor warnings (missing `groupAllowFrom`/`allowFrom`) to tidy up configuration, though this did not block today’s work.
- Links/IDs:
  - Memory backup script: `/home/lagoon3/.openclaw/workspace/scripts/backup_memory.sh`.
  - Backup repository: https://github.com/LLagoon3/openclaw-memory-backup, latest manual commit `81b10ad` from this run.
  - Gateway log referenced for timeouts and channel restarts: `/tmp/openclaw/openclaw-2026-03-06.log`.
  - Gateway service: `openclaw-gateway.service` (user systemd), config file: `~/.openclaw/openclaw.json` (`channels.discord.enabled` toggled today).

## Codex OAuth 재인증 링크 생성 이슈 (2026-03-06)
- 증상: `openai-codex` 모델이 `refresh_token_reused`(401)로 토큰 리프레시 실패 → 재인증 필요.
- 링크 생성 시도에서 발생한 문제들:
  - `openclaw models auth login --provider openai-codex`는 비대화(exec)에서 `interactive TTY required` 오류 발생.
  - TTY로 재시도 시 `Unknown provider "openai-codex". Loaded providers: google-gemini-cli` 오류가 나와 provider auth 플러그인 인식이 꼬인 것처럼 보였음.
  - 추정으로 `plugins.entries.google-antigravity-auth`를 enable 시도했지만, 게이트웨이 로그에서 `plugin removed ... stale config entry ignored` 경고가 나와 해당 플러그인이 유효하지 않았음.
  - 동시에 Codex는 auth 실패, Gemini는 `LLM request timed out`(10분)까지 겹치며 embedded run이 장시간 묶이고 `missing tool result ... inserted synthetic ...` 같은 세션/툴 결과 수리 경고가 발생.
- 중요한 사실: 결국 로그에 OAuth URL 출력은 성공했음(예: `Open this URL in your LOCAL browser: https://auth.openai.com/oauth/authorize?... redirect_uri=http://localhost:1455/auth/callback ...`).
- 운영상 핵심 포인트: redirect_uri가 `localhost:1455`라서 원격 서버에서 auth CLI를 띄우는 경우, 로컬 PC에서 링크를 열어 완료하려면 SSH 포워딩이 필요함.
  - 권장: `ssh -L 1455:127.0.0.1:1455 lagoon3` 유지한 상태에서 브라우저로 URL 열기.

## Day recap 2026-03-06

- What happened:
  - Diagnosed persistent Discord `stuck` restarts and slow responsiveness by probing `openclaw channels status --probe` and tailing `openclaw-gateway` journal logs; confirmed repeated health-monitor restarts with reason `stuck` while system load stayed low.
  - Enabled verbose gateway diagnostics by creating a systemd drop-in at `~/.config/systemd/user/openclaw-gateway.service.d/10-debug.conf` to set `OPENCLAW_LOG_LEVEL=debug`, then restarted `openclaw-gateway.service` and verified the drop-in via `systemctl --user status` and `systemctl --user show ... Environment`.
  - Reproduced Discord traffic ("테스트", "테스트 메시지야", "테스트메시지2") and captured detailed logs showing the relationship between Discord message events and gateway behavior.
  - Analyzed logs and identified repeated `Slow listener detected: DiscordMessageListener took ~40 seconds for event MESSAGE_CREATE`, plus health-monitor restarts (`[discord:default] ... reason: stuck`) occurring around the same windows.
  - Confirmed that these long-running Discord message handlers were tied to full assistant runs (embedded runs with `messageChannel=discord`, including tool/exec calls), meaning the Discord message listener was effectively blocking on LLM/tool work.
  - After debugging, reverted gateway logging back to normal by removing `10-debug.conf`, reloading systemd, restarting `openclaw-gateway.service`, and confirming that `OPENCLAW_LOG_LEVEL` was no longer present in the environment while Discord/Telegram providers both restarted cleanly.
- Decisions / stable facts:
  - Root cause, as of today, is characterized as **structural**: `DiscordMessageListener` processes `MESSAGE_CREATE` events in a way that waits synchronously for long-running assistant work (LLM + tools), leading to 30–40s handler runtimes that the health-monitor interprets as `stuck` and restarts the Discord provider.
  - Discord’s status showing as `running, disconnected, works` in `openclaw channels status --probe` is considered a symptom of these repeated restarts rather than a primary network or CPU bottleneck.
  - Debug logging for the gateway is now treated as a temporary, on-demand tool (via `10-debug.conf`) rather than a permanent configuration; the current baseline is back to normal log level.
- Next actions / blockers:
  - Future structural fix (not implemented yet): refactor the Discord channel plugin so that message events enqueue work or hand off to an async pipeline instead of blocking the listener on full assistant runs, preventing health-monitor `stuck` triggers from long LLM/tool calls.
  - Operationally, Discord can still be temporarily disabled via `channels.discord.enabled=false` in `~/.openclaw/openclaw.json` when troubleshooting or if instability becomes too noisy, with re-enable via `true` + gateway restart.
- Links/IDs:
  - Gateway service: `openclaw-gateway.service` (user systemd), systemd drop-in for debug (created then removed today): `~/.config/systemd/user/openclaw-gateway.service.d/10-debug.conf`.
  - Gateway log file used during analysis: `/tmp/openclaw/openclaw-2026-03-06.log`.
  - Channels probe command: `openclaw channels status --probe`.
  - Main session key involved in Discord message-triggered runs: `agent:main:main`.